DA913 NOT USED

$0.00

1 in stock

Loading...

Stage Kits* Optional

Selected by power and drivability

Clear selection
Subtotal:

Billet Flywheel* Optional

Clear selection
Subtotal:

Pressure Plate Bolt Set* Optional

Clear selection
Subtotal:

Sr20det Crank Bolt Set* Optional

Clear selection
Subtotal:

Release Bearing Carrier* Optional

Nissan Silvia Bearing Carrier 35mm

Clear selection
Subtotal:
Add-Ons Option Total:
Component Options Total:
Order Total:

The add to cart button is disabled because the following component is not selected:

SKU: DA913-6 Category:

Description

** STAGE 1 CLUTCH KIT – ORGANIC **

Best suited for normal street driving and mainly unmodified vehicles,

Features a lightly uprated pressure plate which will have between

10-15% more clamp load over standard specifications, this kit is

paired with an Organic lined clutch plate with sprung center and modulation

between the Organic linings for smooth engagement and drivability.

** UP SIDES TO THIS KIT **

**Better Clamp Load than Factory OEM

**10-inch design that bolts to original OEM flywheel patten.

**Smoother Engagement.

**Better Torque Holding Capacity by 10-15%

**Co-Efficient of lining friction material “Organic” 0.25

** Max Power Rating for this unit **

This kit is rated to 200KW or 360NM MAX (Non-Ductile)

**Drivability of this Clutch**

Very drivable kit being organic.

** WHATS INCLUDED IN KIT…. **

The Clutch kit consists of a Standard Duty 10inch 2200lb Pressure Plate, Organic Clutch Plate, Release Bearing and Alignment Tool.

 

 

 

** STAGE 2 CLUTCH KIT – 6 PUK CERAMIC **

Best suited for normal street driving and mainly unmodified vehicles,

Features a lightly uprated pressure plate which will have between

10-15% more clamp load over standard specifications, this kit is

paired with a “Ceramic 6 Puk Sprung” Clutch Plate which will give you

that Aggressive Engagement when you let your foot off the pedal!!

** UP SIDES TO THIS KIT **

**Better Clamp Load than Factory OEM.

**10-inch design that bolts to original OEM flywheel patten.

**Aggressive Engagement.

**Better “Torque” Holding Capacity by 15-20%

**Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to 220KW or 380NM (non-Ductile)

** Drivability of this Clutch **

This is quite an on/off Ceramic option. It has 6 Ceramic buttons riveted solid to a 1.6mm steel plate with sprung center hub designed to look after your drivetrain.

** WHATS INCLUDED IN KIT… **

Clutch kit consists of a Standard Duty 10inch 2200lb Pressure Plate, 6 Puk Sprung Plate, Release Bearing and Alignment Tool.

 

 

 

** STAGE 2.5 CLUTCH KIT – SWAGGLE CERAMIC **

Best suited for normal street driving and mainly unmodified vehicles, features a lightly uprated pressure plate which will have between 10-15% more clamp load over standard specifications, this kit is paired with a “Swaggle Ceramic Sprung Center” clutch plate with modulation between two ceramic linings, to make engagement smoother than a normal puk plate.

** UP SIDES TO THIS KIT **

**Better Clamp Load than Factory OEM

**10-inch design that bolts to original OEM flywheel patten.

**Slightly on/off engagement not too aggressive!!

**Better Torque Holding Capacity by 15-20%

**Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to 220KW or 380NM (non-Ductile)

** Drivability of this Clutch **

This is a slightly on/off Ceramic option. It has 6 Ceramic buttons riveted solid to a 1.6mm steel plate with sprung center hub designed to look after your drivetrain with a small amount of modulation for smoother engagement.

** WHATS INCLUDED IN KIT… **

The Clutch kit consists of a Heavy Duty Ductile 10inch 3150lb Pressure Plate, Swaggle Ceramic Sprung Plate, Release Bearing and Alignment Tool.

 

 

** STAGE 3 CLUTCH KIT – ORGANIC **

Best suited for high Performance Street driving and track use. Features a heavier Diaphragm pressure plate which will have between 30-35% more clamp load over standard specifications, this kit is paired with a Heavy Duty “Organic Steel Back Lined” clutch plate with sprung center and modulation between the linings for smooth engagement and drivability.

** UP SIDES TO THIS KIT **

**Way Better Clamp Load than Factory OEM.

**10-inch design that bolts to original OEM flywheel patten.

**Smooth Engagement.

**Better Torque Holding Capacity by 35-40%

**Co-Efficient of lining friction material “Organic” 0.25

** Max Power Rating for this unit **

This kit is rated to 360KW or 700NM MAX and is Ductile anti burst steel!!

** Drivability of this Clutch **

Very street drivable kit being organic.

** WHATS INCLUDED IN KIT… **

The Clutch kit consists of a Heavy Duty Ductile 10inch 3150lb Pressure Plate, Heavy Duty Organic steel back lined Sprung Plate, Release Bearing and Alignment Tool.

 

** STAGE 4 CLUTCH KIT – 6 PUK CERAMIC **

Best suited for high Performance Street driving and track use. Features a heavier Diaphragm pressure plate which will have between 30-35% more clamp load more clamp load over standard specifications, this kit is paired with a “Ceramic 6 Puk Sprung” Clutch Plate which will give you that Aggressive Engagement when you let your foot off the pedal!!

** UP SIDES TO THIS KIT **

**Way Better Clamp Load than Factory OEM.

**10-inch design that bolts to original OEM flywheel patten.

** Aggressive Engagement.

**Better Torque Holding Capacity by 45-50%

**Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to 400KW or 900NM MAX and is Ductile anti burst steel!!

** Drivability of this Clutch **

This is quite an on/off Ceramic option. It has 6 Ceramic buttons riveted solid to a 1.6mm steel plate with sprung center hub designed to look after your drivetrain.

** WHATS INCLUDED IN KIT… **

Clutch kit consists of a Heavy Duty Ductile 10inch 3150lb Pressure Plate, Ceramic 6 Puk Sprung Plate, Release Bearing and Alignment Tool.

 

 

 

 

** STAGE 4.5 CLUTCH KIT – SWAGGLE CERAMIC **

Best suited for high Performance Street driving and track use. Features a heavier Diaphragm pressure plate which will have between 30-35% more clamp load more clamp load clamp load over standard specifications, this kit is paired with a “Swaggle Ceramic Sprung Center” clutch plate with modulation between two ceramic linings, to make engagement smoother than a normal puk plate.

** UP SIDES TO THIS KIT **

**Way Better Clamp Load than Factory OEM.

**10-inch design that bolts to original OEM flywheel patten.

** Slightly on/off engagement not to aggressive!!

**Better Torque Holding Capacity by 45-50%

**Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to 400KW or 800NM MAX and is Ductile anti burst steel!!

** Drivability of this Clutch **

This is a slightly on/off Ceramic option. It has 6 Ceramic buttons riveted solid to a 1.6mm steel plate with sprung center hub designed to look after your drivetrain with a small amount of modulation for smoother engagement.

** WHATS INCLUDED IN KIT… **

The Clutch kit consists of a Heavy Duty Ductile 10inch 3150lb Pressure Plate, Swaggle Ceramic Sprung Plate, Release Bearing and Alignment Tool.

 

 

 

** STAGE 5 CLUTCH KIT – 6 PUK CERAMIC **

Best suited for high Performance track use. Features a heavier Diaphragm pressure plate and uprated further to 3900lb!! which will have between 55-60% more clamp load more clamp load over standard specifications, this kit is paired with a “Ceramic 6 Puk Sprung” Clutch Plate which will give you that Aggressive Engagement when you let your foot off the pedal!!

** UP SIDES TO THIS KIT **

**Massively Better Clamp Load than Factory OEM.

**10-inch design that bolts to original OEM flywheel patten.

** Aggressive Engagement.

**Better Torque Holding Capacity by 65-70%

**Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to a massive 450KW or 990NM MAX and is Ductile anti burst steel!!

** Drivability of this Clutch **

This is quite an on/off Ceramic option. It has 6 Ceramic buttons riveted solid to a 1.6mm steel plate with sprung center hub designed to look after your drivetrain.

** WHATS INCLUDED IN KIT… **

The Clutch kit consists of a Heavy Duty Ductile 10inch 3900lb Pressure Plate, Ceramic 6 Puk Sprung Plate, Release Bearing and Alignment Tool.

Best suited for high Performance track use. Features a heavier Diaphragm pressure plate and uprated further to 3900lb!! which will have between 55-60% more clamp load more clamp load over standard specifications, this kit is paired with a “Ceramic 5 Puk Solid” Clutch Plate which will give you that Massively Aggressive Engagement when you let your foot off the pedal!!

 

 

 

 

** STAGE 5.5 CLUTCH KIT – 5 PUK SOLID CERAMIC **

** UP SIDES TO THIS KIT **

**Massively Better Clamp Load than Factory OEM.

**10-inch design that bolts to original OEM flywheel patten.

** Very Aggressive Engagement.

**Better Torque Holding Capacity by 65-70%

**Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to a massive 450KW or 1080NM MAX and is Ductile anti burst steel!!

** Drivability of this Clutch **

This is a very on/off Ceramic option. It has 5 Ceramic buttons riveted solid to a 1.6mm steel plate with a solid center hub designed to look after nothing but getting the power to your wheels!! Our best torque holding kit in single plate!!

** WHATS INCLUDED IN KIT… **

Clutch kit consists of a Heavy Duty Ductile 10inch 3900lb Pressure Plate, Ceramic 6 Puk Sprung Plate, Release Bearing and Alignment Tool.

 

** STAGE 8 TWIN PLATE ORGANIC CLUTCH KIT **

Drew’s Garage Project 225mm (9inch) STAGE-8 Twin Plate Organic Clutch kit with anti-rattle intermediate plate for Sr20det RWD with 5 Speed Transmission. Max rated power for this Street Organic unit is 1000Nm with a “peak” of 1125Nm. Drivability and Clutch Pedal feel should be very close to OEM but hold a ton of more torque goodness over OEM. Clutch plates are modulated organic to give you a softer engagement and better on your drivetrain components! Clutch Cover is made from Alloy Steel and is super lite with holes for heat dissipation without compromising strength, Steel Floater-plate and top steel plate are heat treated steel hence their black color and are very “resistant” to warping under heat, This Comprehensive kit comes complete with Crank Bolts. Pressure Plate Bolts, Release Bearing, Carrier, Spigot Bush/Bearing, Alignment Tool and Installation Manual.

**Please note a “Twin Plate flywheel” needs to be purchased from the drop-down menu to use this clutch pack, that way going forward it will be a case of just buying this clutch pack and getting your old flywheel machined to keep cost down**

**We can customize this package if you are using a different Gearbox etc, please enquire**

 

 

** STAGE 9 TWIN PLATE SWAGGLE CERAMIC CLUTCH KIT **

Drew’s Garage Project 225mm (9inch) STAGE-9 Twin Plate Swaggle Ceramic Clutch kit with anti-rattle intermediate plate for Sr20det RWD with 5 Speed Transmission. Max rated power for this Street Swaggle Ceramic unit is 1250Nm with a “peak” of 1380Nm. Clutch Pedal feel should be very close to OEM and have a slight bite on engagement to lock in all that torque goodness. Clutch plates are modulated ceramic to give you a softer engagement and better on your drivetrain components! Clutch Cover is made from Alloy Steel and is super lite with holes for heat dissipation without compromising strength, Steel Floater-plate and top steel plate are heat treated steel hence their black color and are very “resistant” to warping under heat, This Comprehensive kit comes complete with Crank Bolts. Pressure Plate Bolts, Release Bearing, Carrier, Spigot Bush/Bearing, Alignment Tool and Installation Manual.

**Please note a “Twin Plate flywheel” needs to be purchased from the drop-down menu to use this clutch pack, that way going forward it will be a case of just buying this clutch pack and getting your old flywheel machined to keep cost down**

**We can customize this package if you are using a different Gearbox etc, please enquire**

 

** STAGE 9 TWIN PLATE SINTERED IRON CLUTCH KIT **

Drew’s Garage Project 225mm (9inch) STAGE-10 Twin Plate Sintered Iron Clutch kit with anti-rattle intermediate plate for Sr20det RWD with 5 Speed Transmission. Max rated power for this “Drift” Sintered Iron unit is a Staggering 1500Nm with a “peak” of 1650Nm. Clutch Pedal feel should be very close to OEM and have a good bite on engagement to lock in all that torque goodness. Clutch plates are modulated ceramic to give you a softer engagement and better on your drivetrain components! Clutch Cover is made from Alloy Steel and is super lite with holes for heat dissipation without compromising strength, Steel Floater-plate and top steel plate are heat treated steel hence their black color and are very “resistant” to warping under heat, This Comprehensive kit comes complete with Crank Bolts. Pressure Plate Bolts, Release Bearing, Carrier, Spigot Bush/Bearing, Alignment Tool and Installation Manual.

**Please note a “Twin Plate flywheel” needs to be purchased from the drop-down menu to use this clutch pack, that way going forward it will be a case of just buying this clutch pack and getting your old flywheel machined to keep cost down**

**We can customize this package if you are using a different Gearbox etc, please enquire**

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.