STAGE 6.0 CLUTCH KIT – “6 PUK SPRUNG CERAMIC” 250Kw or 380Nm **EXTRA HEAVY DUTY!!**

Description

** STAGE 6.0 CLUTCH KIT – “6 PUK SPRUNG CERAMIC” 250Kw or 380Nm **

** UP SIDES TO THIS KIT **

** Massively Better Clamp Load than Factory OEM.

** 8.5-inch (215mm) design that bolts to OEM Flywheel

** Very Aggressive Engagement.

** Better Torque Holding Capacity by 55-60% over stock clutch and has extra torque straps!!

** Co-Efficient of lining friction material “Ceramic” 0.38

** Max Power Rating for this unit **

This kit is rated to a massive 250KW or 380NM MAX.

** Drivability of this Clutch **

This is an on/off Ceramic option. It has 6 Ceramic buttons riveted solid to a 1.6mm steel plate with a sprung center hub designed to look after nothing but getting the power to your wheels!! Our best torque holding kit in single plate!!

** WHATS INCLUDED IN KIT… **

Clutch kit consists of a Heavy Duty Ductile 8.5inch 2500lb Pressure Plate, Ceramic 6 Puk Sprung Plate and Release Bearing

Best suited for high Performance track use. Features a heavier Diaphragm pressure 2500lb!! which will have between 55-60% more torque load over standard specifications, this kit is paired with a “Ceramic 6 Puk Sprung” Clutch Plate which will give you that Very Aggressive Engagement when you let your foot off the pedal!! Not for the faint hearted!! Finally at last, a Honda clutch that won’t spit springs out of the clutch plate!!

Old Flywheel needs to be machined back to OEM Spec of 1.65mm Step.